• 9th Day

    16th Jan 16:45 400W input. Disconnected Batt 2 At 17:00 running 1.2A from Batt 1, voltage is 12.28 ??. Will check voltage of bat 1 & 2 in morning. How SG at 1.29 with such low voltage? more »
  • 7th Day

    14th Jan 10:30 battery was on Absorption at 15.67 volts though set Victron to 15.4 with a max current of 10A. Absorption time was exactly 2 hours, probably some dumb AI as the voltage and current would not have been consistently that high. Then on float… more »
  • 3rd & 4th Days

    10 Jan 910W into batteries 1,2 1nd 3 Batt 4 at 81% 11 Jan 930W into batteries 1,2 1nd 3 Batt 4 at 94% Overrode float voltage for 2 hours to get 15v into battery Batteries hardly warm to the touch more »
  • 2nd Day Problems

    9th Jan Grey day so few photons. The problem I have is the inconsistent readings so see these screen shots taken from 15:13 over the next 6 minutes. The figures in the first image do not equate to those earlier in the day when I monitored. Then the max… more »
  • Plymouth Battery Centre Test

    14th -16th Jan 2018 I've just been informed that Batt4 is poor and has a 10% capacity, it was subsequently charged and discharged and I was told it now has 25% capacity. It is being charged again and I should pick it up this Thursday 18th My attempt to… more »
  • Specific Gravity Batt 1