**27th Feb** See https://disqus.com/home/discussion/victronwiki/victronconnect_manual_12/newest/
The problem arose that the Load reading was incorrect and didn't seem to work. On 28th I assessed it was reading some 0.6A low so if I wasn't using much it appeared as there was no load. I disconnected the MPPT after sunset on 28th Feb and all seems OK again.
**9th Feb** See image [histFeb9,gif] It seems as though as the current increases the MPPT becomes less efficient to a degree of 90%. 100w was used during the day of 1.21K yield though there was little load.
**Today the 8th Feb** I recorded 240W usage from the previous day, most I expect from the late afternoon through to midnight: so maybe 8hr @ 30w more than double what I expected. So today I have noted 30w usage by 16:00 and have loaded (comp, router, led4, phone) which is Victron Connect reads as 1.3 amp. Will leave on until midnight and expect 8 x 1.3 x 12.5w or 130w + 30w for a total of 160. Let's see :)
**23:50** consumption 130w total So 30w before 16:00 and 100W over 8 hours with computer router and led4 for 8 hours (12.5w/h :: 1A x 12.5V)
Created by • Last edit by on 28 Feb 2018